|
Set your browser to the width of the line below for best viewing.
© 1996 by mjh |
|
|
|
|
|
|
||
 |
muse:
 elcome
to the Graphics Muse! Why a "muse"?
Well, except for the sisters aspect, the above definitions are
pretty much the way I'd describe my own interest in computer graphics:
it keeps me deep in thought and it is a daily source of inspiration.
|
 his
column is dedicated to the use, creation, distribution, and dissussion of
computer graphics tools for Linux systems.
Last month I had promised to do a review of Keith Rule's new book on 3D File Formats this month. I'll also said there would be a section on adding fonts on Linux in last months colums. Ok, I'm a liar. First, I decided that although Keith's book deserves some examination I felt that another book, Mark Kilgard's OpenGL text, had a more direct bearing on Linux users. I'll consider taking a look at Keith's book some time in the future. Second, I had quite a bit of other material for January's column so had decided to move the font discussion to February's column. However, I forgot to update the introduction in January's column to reflect this change. My apologies. Now for the bad news: I had a major system crash on the 16th of January which first of all caused me over a week of grief trying to recover and second caused the loss of a large number of files. No, I wasn't doing backups. So shoot me. I managed to recover an earlier copy of this months Muse column from a laptop I have, but I lost a good portion of what I'd already done. Now, as I write this, I have 3 days to get the column done and uploaded. The result is that the book review and a number of other items will have to be put off till another time. So, does anyone have a decent tape backup system that can run on ftape drives? In this months column I'll be covering, along with how to add fonts to your system:
NOTE: I lost all my old email and mail aliases when my system went down. If you have been in touch with me in the past and want to stay in touch please send me some email ([email protected])! I'm particularly interested in hearing from Paul Sargent, who was helping me with my look into BMRT. I lost your email address Paul, along with all the messages we'd exchanged on the BMRT article series! Write me (or if you know Paul, please have him contact me)! |
|
|
Disclaimer: Before I get too far into this I should note that any of the news items I post in this section are just that - news. Either I happened to run across them via some mailing list I was on, via some Usenet newsgroup, or via email from someone. I'm not necessarily endorsing these products (some of which may be commercial), I'm just letting you know I'd heard about them in the past month. | |||||
xfig 3.2.0 Beta availableXfig is a menu-driven tool that allows the user to draw and manipulate objects interactively in an X window. The resulting pictures can be saved, printed on postscript printers or converted to a variety of other formats (e.g. to allow inclusion in LaTeX documents).xfig is available on ftp.x.org in /contrib/applications/drawing_tools/xfig. You also need a JPEG library, which can be found in /contrib/libraries. and TransFig version 3.2.0-beta1. TransFig contains the postprocessor needed by xfig to convert fig files to one of several output formats, such as PostScript, pic, LaTeX etc. The TransFig package is in the directory /contrib/applications/drawing_tools/transfig. |
|
|
Alexander Zimmermann has uploaded another update to his ImageMagick package.ImageMagick (TM), version 3.7.9, is a package for display and interactive manipulation of images for the X Window System. The package has been uploaded to sunsite.unc.edu:/pub/Linux/Incoming as:
ImageMagick supports also the Drag-and-Drop protocol form the OffiX package and many of the more popular image formats including JPEG, MPEG, PNG, TIFF, Photo CD, etc. You will also need the package libIMPlugIn-1.0-elf to get it working. These can be retrieved from ftp.wizards.dupont.com /pub/ImageMagick/binaries. |
||
|
|
|||||
World Movers, the first VRML 2.0 Developer ConferenceI received the following information via email (unsolicited, but its probably the first time I got something I found really interesting via a blind email post). Note that I have nothing to do with this conference, other than I wish they'd invite me to go - expenses paid, of course:World Movers, the first VRML 2.0 Developer Conference, will be held on January 30 and 31 at the ANA Hotel in San Francisco, CA. At World Movers you will:
With a pan-industry advisory board and a wide array of hosts and participants, World Movers will give you a complete picture of VRML 2.0 content and applications from all perspectives. Register by calling (800)488-2883 or (415)578-6900, or go online at http://www.worldmovers.org. |
|||||
|
|
|||||
PNG Magick Plug-in 0.8There is a new plug-in for Unix/Linux versions of Netscape called PNG Magick Plug-in 0.8. This plug-in supports the following file formats: PNG, XPM, TIFF, MIFF, TGA, BMP, PBM, PGM, PPM, PNM, PCX, FITS, XWD, GIF, JPEG, WAV and MPEG-1. It is reported to support Drag and Drop capabilities as well.For MPEG-1 support you need the Xew library which doesn't seem to work well with the Linux version of this plug-in. PNG Magick Plug-in 0.8 is published under the GNU General public License and is available at http://home.pages.de/~rasca/pngplugin/. |
|
|
TkFont v1.1There is a new tool for viewing fonts on Linux. I haven't tried this yet so I don't know how well it works. It has been uploaded to tsx-11.mit.edu in the /incoming directory. The file-name is `tkfont-1.1.tar.gz'. |
||
|
|
|||||
Version 0.1.8 of Lib3d is now available from Sunsite.Lib3d is a high performance 3d C++ library distributed under the GNU LGPL. Lib3d implements sub-affine texture mapping, Gouraud shading and Z-buffer rasterization, with support for X11, DGA, SvgaLib and DOS.Lib3d is available from ftp://sunsite.unc.edu/pub/Linux/Incoming/lib3d-0.1.8.tar.gz For more information: http://www.ozemail.com.au/~keithw |
|||||
|
|
|||||
CFP: ACM SIGGRAPH 97 Sketches ProgramDeadline: April 16, 1997The following was posted in a number of places. I got it via a friend on the Gimp User mailing list. I have no association with SIGGRAPH (unfortunately) so can offer no other details than the following:
SKETCHES are live, 15 minute presentations that provide a forum for
unique, interesting ideas and techniques in computer graphics.
Sketches allow the presentation of late-breaking results, works in
progress, art, design, and innovative uses and applications of
graphics techniques and technology. Sketch abstracts will be published
in the Visual Proceedings.
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
Did You Know?The VRML 2.0 Specification, Moving Worlds from SGI, provides for "spatial audio"? This is a definition of how sound is played in relationship to your point in space and distance from an object which has a sound attached to it. The O2 system from SGI has a VRML browser which was demonstrated on Part 2 of PC-TV's series on Unix which covered commercial Unix options. Part 3 of this series started airing at the end of January and is devoted to our favorite OS - Linux!There is a wonderful description on using color palettes with Web pages at http://www.adobe.com/newsfeatures/palette/main.html. The page is a reprinted article by Lisa Lopuck from Adobe Magazine and is quite detailed. Check it out! Have you been thinking about using POV-Ray 3.0's new caustics feature? Are you unsure exactly what it does? Want to learn all about it? Then check out The Caustic Tutorial for POV. This is a very detailed explanation on what caustics are and how to use them. Briefly, caustics are formed when light is either focused or dispersed due to passing through media with different indices of refraction. Bright spots in the shadows are where light is focused and dark spots are where the light has been dispersed.Thanks to Paul R. Rotering for this description (taken from the IRTC-L mailing list). Q and A Q: What is displacement mapping? A: Displacement mapping is not only the perturbing of the surface normal of an object, like a bump maps do, but in fact a distorting of the object itself. You can think of it as a height field over an arbitrary surface. The latest version of BMRT is reported to support displacement maps. Few other publicly available renderers provide this feature. Q: I have just downloaded the complete batch of plug-ins from the "Plug-in Registry", and noticed that the "interpolate", "lightest" and "darkest" plug-ins appear to do the same thing as the "blend", "add" and "multiply" channel ops respectively. Is this correct, or is there some difference under certain circumstances?
A:
Not exactly. Blend uses integer values and restricts you to
interpolation. Interpolate/Extrapolate uses floating point values and
does not restrict the range of the blending value --- you can do
extrapolation, too (look at my home page for some examples):
Both of these questions were answered by Mena Quintero Federico, aka Quartic, on the Gimp User mailing list. |
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
GIF animations update: MultiGIFAfter my first column (Linux Gazette, issue 12), Greg Roelofs wrote me to tell me about another tool for creating animated GIF images. Andy Wardley's MultiGIF allows the use of sprite images as part of the animation. Sprite images are like small sections of an image. Instead of creating a series of GIF images that are all the same size and simply appending each one at the end of the other (as WhirlGIF does) the user can create an initial image along with a series of smaller images that are positioned at offsets from the upper left corner of the full image.By using sprites (I'm not completely sure what a sprite really is, but Greg used this term and it appears similar to other uses I've seen - someone correct me if its not the correct use of the term) the GIF animator can reduce the file size anywhere from a factor of two to a factor of 20 in size. As proof, Greg offered his animated PNG-balls, which went from 577k to 233k in size. Another animation, a small horizontally oscillating "Cylon eyes" (referring to the old Battlestar Gallatica metal menace), provided a savings of a factor of 20. MultiGIF comes with C source code and is shareware. Andy only asks that you provide a donation if you find you are using it frequently. There is also a utility called gifinfo which can be used to identify GIF files, including multiframe GIF animations. Both WhirlGIF and MultiGIF come with fairly decent documentation describing how to use the various command line options. About the only thing that might be missing is why you would use one option over or in conjunction with another, but thats a minor point. I find the use of sprites with MultiGIF and its smaller output files more useful to me. However, new users who are not quite familiar with how to create sprites (including transparency) with tools like the Gimp might prefer the simpler WhirlGIF. |
|
|
Adding Fonts to your systemFonts are used extensively for creating graphics images. Many of the graphics on my Web pages and in the Graphics Muse use fonts I've installed from collections of fonts on commercial CDs. Fonts are also used for ordinary text in X applications, from the fonts in your xterm to the title bars provided by your window manager to the pages displayed by xman. The difference is hard to distinguish, but whether used for ordinary text or to create outrageous graphics, adding fonts to your system and letting your X server know about them is the first step .Just so you know: nearly all X applications accept the "-fn" and/or "-font" command line arguments. This is a feature built into the X Windows API. How this is used depends on the application. For xterms, just use "-fn To know what fonts are available on your system you can look under the font directories for fonts.alias files. There is supposed to be one of these in each directory under /usr/X11R6/lib/X11/fonts, but whether there is or not depends on the distribution you're using. The name to use is the name on the left. For example, under /usr/X11R6/lib/X11/fonts/misc, in the file fonts.alias there is the following line:
xterm -fn 5x7 You can actually use the string on the right, but unless you understand how fonts are defined you probably don't want to do this. I don't want this to turn into an X Windows column. There are other places for such discussions, and I'm sure LG could use a regular columnist for X. But this column is about computer graphics so this is all I'm going to say about using fonts in X applications from the X resources standpoint. In any case, since the X server is being used to handle the fonts, adding fonts to your system is the same whether you use them for graphics or as X resources. Suppose you had a font called westerngoofy that you wanted to use in the Gimp as the start of some neat title graphic for a Web page. By default there isn't an entry in any of the fonts.alias files for westerngoofy, so when you use the text tool in the Gimp it won't show up in the list of available fonts. There are 3 steps to making this font available for use with the Gimp:
|
|
|
|
|
|
Linux Graphics mini-Howto
Unix Graphics Utilities
Linux Multimedia Page
Some of the Mailing Lists and Newsgroups I keep an eye on and where I get alot of the information in this column:
The Gimp User and Gimp Developer Mailing Lists.
The IRTC-L discussion list (I'll get an address next month).
comp.graphics.rendering.raytracing
comp.graphics.rendering.renderman
comp.os.linux.announce
Future Directions
Next month:
![[ TABLE OF CONTENTS ]](../gx/indexnew.gif)
![[ FRONT PAGE ]](../gx/homenew.gif)
